Here's a render of the gag with most of the rest of the muzzle taken away, as well as a cross section diagram.
The gag has a plug to close off the feeding tube. This is to prevent saliva from dripping out as well as to further reduce the noise an inmate can make while wearing it.
The feeding tube in the middle has an extra feature, a spherical cavity about 4 cm past the opening. This is to accept the gag plug, which is made of a very stiff rubber and will, at rest, have a spherical bulb at the end to match the cavity.
Plug is handled by a robot arm with a suction cup tip connected to a vacuum piston. Prior to insertion, piston will retract pulling a strong vacuum inside the plug, causing the bulb to contract. Suction also secures the plug to the arm. Once inserted, the piston extends, releasing the vacuum and allowing the bulb to expand, filling the small cavity and locking the plug in place.
This is meant to work with no lubrication provided all surfaces are polished. Actual dimensions would be worked out in the prototyping phase. Actual filler material for the gag will be worked out later, or left ambiguous. As long as it is some kind of low density liquid or gel (NOT a gas!)
The outer portion of the plug is much less substantial than the one I used to draw, it no longer looks like a pacifier and is now simply just round.
The gag has a plug to close off the feeding tube. This is to prevent saliva from dripping out as well as to further reduce the noise an inmate can make while wearing it.
The feeding tube in the middle has an extra feature, a spherical cavity about 4 cm past the opening. This is to accept the gag plug, which is made of a very stiff rubber and will, at rest, have a spherical bulb at the end to match the cavity.
Plug is handled by a robot arm with a suction cup tip connected to a vacuum piston. Prior to insertion, piston will retract pulling a strong vacuum inside the plug, causing the bulb to contract. Suction also secures the plug to the arm. Once inserted, the piston extends, releasing the vacuum and allowing the bulb to expand, filling the small cavity and locking the plug in place.
This is meant to work with no lubrication provided all surfaces are polished. Actual dimensions would be worked out in the prototyping phase. Actual filler material for the gag will be worked out later, or left ambiguous. As long as it is some kind of low density liquid or gel (NOT a gas!)
The outer portion of the plug is much less substantial than the one I used to draw, it no longer looks like a pacifier and is now simply just round.
Category All / Bondage
Species Unspecified / Any
Gender Any
Size 1280 x 646px
Listed in Folders
Was the description cut off because you were just gagged yourself? That's my story of it~
Oh dear, it didnt all copy over. I’’ll fix that soon. Thanks for pointing it out, i might not have noticed otherwise
Not gonna lie, the more I see of all this equipment and gear you're designing for A.R.C. the more I want to volunteer to be taken there.
All of the equipment you've created is so well designed and thought out!! They are fantastic, and wouldn't mind to be a patient/inmate there!
Thank you much! I really want all this to be real, which is why I'm being so thorough and detailed.
If we can find someone to throw a bunch of money at this, it COULD be.......
If we can find someone to throw a bunch of money at this, it COULD be.......
Man, ARC remains incredible. I genuinely can't believe you're so good at design.
Someday when we reach a post-scarcity society I'll definitely book a spot. I saw you'd love this to be real - I do feel like it's well within the realm of possibility, and I'm an optimist when it comes to human progress.
Here's a question for you - how much material do you think it would take to construct the whole facility, in its most fully realized form?
Someday when we reach a post-scarcity society I'll definitely book a spot. I saw you'd love this to be real - I do feel like it's well within the realm of possibility, and I'm an optimist when it comes to human progress.
Here's a question for you - how much material do you think it would take to construct the whole facility, in its most fully realized form?
I'm just thinking of crazy shit like asteroid mining and such. Though a Matrix-like VR would be nice. As long as it lets one design with real materials and such! Instead of handwaving, make a functional structure, idk.
I admit I kinda liked the pacifier look X3 but this is nice too. Seeing new gear from you is always fun and thought provoking
Comments